Description

The Features of ICI Pilling and Snagging Tester TF223

Accurate testing and test results are highly consistent with third-party international testing agencies.

Applicable to various international standards, such as ISO12945-1, GB/T 4802.3, NEXT TM19, BS 8479, and JIS L1058 method D-2.

It is equipped with a high-quality polyurethane carrier tube, durable and stable.

It can be equipped with 2 or 4 test boxes, smooth operation, low noise, LCD screen displaying all test parameters;

Since 2010, it has been sold well in 42 countries worldwide and is highly recognized by customers.

The Application of ICI Pilling and Snagging Tester TF223

The ICI pilling and snagging tester uses a tumbling test method to test the fuzzing and pilling of fabrics. This apparatus is suitable for the friction pilling test of sparse wool knitted combed fabrics and other pilling-prone fabrics to assess the pilling level of the fabric under stress-free conditions.

ICI pilling tester uses a universal drive system with 2 or 4 positions, an electronic digital counter, and a sample mounting fixture. The machine accepts ICI Pilling boxes and ICI pilling drums.

Specifications of ICI Pilling and Snagging Tester TF223

• Rotation Speed 60±2 rpm
• Control Mode Single-chip control
• Touch panel

Optional order

• Pilling Assessment Viewer
• Set of 5 Photographic Standards
• Mounting Jig (used to install specimens easily)
• Cork liner – pack of 6
• Rubber tube – pack of 4

Model

• TF223A ICI Pilling Tester – 2 stations
• TF223B ICI Pilling Tester – 4 stations

Power

220/110 V

50/60 Hz

Weight

TF223A: 60 kg

TF223A: 110 kg

Dimensions

TF223A: 830 x 430 x 550 mm (L x W x H)

TF223B: 830 x 430 x 900 mm (L x W x H)

Standards

ISO12945-1	GB/T 4802.3	NEXT TM19
Optional Standards:	BS 8479	JIS L1058 method D-2

Test principle

Mount a specimen on a polyurethane tube and turn at a constant speed in a wooden box lined with cork. After a specified number of turns, observe the specimen for fuzzing and pilling, then assess properties.

Test procedure

1 Prepare the equipment and materials for the ICI pilling & snagging test. Such as ICI pilling and snagging tester, polyurethane carrier tube, PVC tape, etc.
2 Pre-treat the specimen according to the agreed method, e.g. washing or dry cleaning.
3 Sampling according to the test standard, measuring 125 * 125 mm and sewn into tubes.
4 Mount the specimen onto the polyurethane tube according to the standard.
5 Carry out the test.
6 Place the specimen in the rating box, record the change in the surface of the specimen and write a test report.

Notes on the use of the ICI pilling and snagging tester

1 Check the speed of the pilling and snagging box regularly and keep it at (60±2) rpm/min.
2 Before using a new liner, it is necessary to rotate it in the pilling box with four blank polyurethane tubes for about 200H until no cork shavings come off the liner.
3 The cork liner should be replaced after prolonged use when the surface becomes smooth or is damaged by contamination.
4 The polyurethane tube should be inspected regularly, especially for dents and roughness at both ends, and replaced if damaged.
5 Before each test, clean the lint and debris inside the ICI pilling box to keep it clean.

Appendix: Rating of change in the specimen surface

5 grade: No change
4 grade: Slight surface pilling or fuzzing
3 grade: Moderate surface pilling, with balls of different sizes and densities covering part of the surface of the specimen.
2 grade: Significant surface pilling, with balls of different sizes and densities covering most of the surface of the specimen.
1 grade: Severe pilling, with balls of different sizes and densities covering the entire surface of the specimen.

Welcome to TESTEX – a professional textile testing instrument supplier – ICI Pilling and Snagging Tester TF223A/B is on sale, contact us to get a detailed price quote.